This thread looks to be a little on the old side and therefore may no longer be relevant. Please see if there is a newer thread on the subject and ensure you're using the most recent build of any software if your question regards a particular product.
This thread has been locked and is no longer accepting new posts, if you have a question regarding this topic please email us at support@mindscape.co.nz
|
I have a chart control whose data is being taken from a DataTable with several double values. When the max data value for a particular axis is less than 1 (let's say 0.0354 for instance) and the minimum is -.000123, (or very close to zero) the minimum and maximum values shown in the axis are -2 and 1 respectively. If I have data that is from, lets say 0 to 3, this is not a problem. |
|
|
Hi, Just letting you know we have recreated this bug and are working on a fix, will let you know here when it is ready. |
|
|
Hello The chart puts a logical buffer of 1 between the data and the edge of the chart along the Y axes. You can change this by setting the YAxisDataBuffer property of each series you add to the chart. Set this property to zero, or a small value such as 0.005. This will produce better visual results for small data. Unfortunately the chart does not currently auto calculate this value, so if you have a single chart that may display small or large values at different times, you'll need to adjust this property value dynamically. Jason Fauchelle |
|